NTSB faults parade plans in fatal train collision

Print
Email
|

Associated Press

Posted on November 5, 2013 at 3:33 AM

Updated Tuesday, Nov 5 at 3:00 PM

WASHINGTON (AP) — The lack of safety planning by parade organizers and the city of Midland, Texas, was faulted by federal investigators Tuesday in an accident last year in which a freight train rammed a tractor-trailer truck towing a parade float with veterans and their wives.

Four veterans were killed, and 11 veterans and their wives were injured, several seriously.

A local charity had invited veterans who had been wounded in Iraq and Afghanistan to Midland for a three-day weekend of hunting and shopping in appreciation of their service, including a parade timed to fall near Veterans Day. The parade had been an annual event in Midland, a transportation and commerce hub in the West Texas oilfields, for nine years.

Led by three police vehicles and a marching band, two floats with veterans and their spouses were en route to a banquet in their honor on Nov. 15, 2012 when the collision occurred. One float had just cleared the highway grade crossing, and a second flatbed truck was edging across the tracks when it was struck by a Union Pacific train traveling at 62 mph in a 70 mph zone. Several veterans and their wives managed to jump from the float before the collision.

At a meeting concluding a yearlong investigation of the accident, the five-member National Transportation Safety Board placed responsibility for the collision on parade organizers and city officials.

Citing several other fatal accidents at parades and special events around the country, the board made a series of safety recommendations to cities and counties regarding the need for permits and safety plans.

The Midland accident could have been prevented if the city had required parade organizers to have a safety plan, investigators told the board, describing an annual event at which safety precautions had melted away over the years.

Midland officials, responding to the board's findings, said in a statement that while they've already implemented significant changes in the city's process for handling special events, they also realize "there is more work to be done.

"The review and upcoming one-year anniversary of the accident bring back many painful emotions and memories, and our hearts continue to go out to the families who relive the accident every single day," the city's statement said. "Our hope is that those who have followed our story are still listening so that these recommendations can also help them hold safe, successful events in the future."

After the first few years that the parade was held the route was changed from one that didn't cross Union Pacific's tracks to a route that did cross the tracks. For several years after the route change, parade organizers would alert the railroad to their plans and police were stationed at the highway grade crossing. But even those precautions were dropped by last year.

In the early years of the parade, organizers also obtained parade permits from the city. But last year, no permit was obtained in violation of city regulations, investigators said. Even if a permit had been issued, city regulations didn't require parade organizers to submit a safety plan, they said.

"It seems things got lax in the planning," highway safety investigator Gary Van Etten told the board. "There was no (safety) plan."

The railroad crossing warning system was activated the required 20 seconds before the accident, and the guardrail began to come down seven seconds after that, but the truck's driver was unaware of the danger because circumstances of the parade had created an "expectation" of safety, investigators said.

Not only was the parade being led by police vehicles, but police were stationed at intersections along the parade route. The truck driver had been allowed to proceed for 34 minutes through a series of red lights before the accident, investigators said. By the time the driver arrived at the grade crossing, he had reason to assume he could proceed through a red light there as well, they said.

"I think he was led down the primrose path, he was invited across these railroad tracks," said NTSB board member Robert Sumwalt.

Cheers of support from a flag-waving crowd watching the parade turned into shouts of horror when they saw the freight train barreling down on the float. The truck driver didn't recognize the warning bells that sounded as the train approached because of noise from the crowd, the marching band and motorcycles in the parade, investigators said.

Nor did the driver notice the flashing red warning lights at the crossing because of the many flashing lights of police and other official vehicles in the approximately 100-vehicle parade, they said.

The train's engineer sounded the locomotive's horn and pulled the emergency brake seconds before the collision, but was unable to stop in time. The first truck towing a float, which was in front of the truck that was struck, was fitted with a train horn that had been sounding throughout the parade, yet another reason why the driver of the truck that was struck didn't register the danger until it was too late, investigators said.

___

Follow Joan Lowy on Twitter at http://www.twitter.com/AP_Joan_Lowy

Print
Email
|