More than a half a million drop side cribs are being recalled after the CPSC learned of three deaths.
The recall affects all Generation 2 Worldwide and “ChildESIGNS” drop side cribs. The problem is with the cribs plastic hardware. It can break and cause the drop side of the crib to detach from a corner of the crib.
CPSC has "received reports of three infants who suffocated when they became entrapped between the crib mattress and the drop side when the drop side detached. In July 2007, an eight month old child from Newark, Ohio suffocated when he became entrapped between the drop side and the crib mattress. The drop side of his crib had detached due to a broken plastic stop tab on the lower track. In October 2003, an eight month old child from Richmond, Ind. suffocated when he became entrapped between the drop side and the crib mattress. The plastic hardware on the drop side was broken and allowed the drop side to detach from the crib headboard in one corner. In September 2002, a six month old from Staunton, Va. suffocated when he became entrapped between the drop side and crib mattress. The lower drop side track was missing two screws which allowed it to pull away from the headboard post and detach."
CPSC has also received reports of 20 other drop side incidents, 12 of which involved the drop side detaching in a corner of the crib. In two of these incidents, a child became entrapped. One child suffered bruising from the entrapment. There are five reports of children falling out of the cribs due to drop side detachment. One child suffered a broken arm as a result of the fall.
Here’s the bigger problem-- Generation 2 went out of business in 2005 so the government has limited information about the cribs. So the government is warning parents and caregivers to stop using these cribs immediately.
Some of the known model numbers are: 10-110X, 10-210X, 21-110X, 20-710X, 64-315X, 26-110X, 90-257X, 20-810X, 46-715X, 64-311X, 74-315X, 21-815X, 21-810X, 20815X, 308154 and 54915. (The “X” denotes where an additional and varying number may appear at the end of the model number.) However, all Generation 2 Worldwide and “ChildESIGNS” drop side cribs are included in this recall, including those with other model numbers.
The name “Generation 2 Worldwide” appears on a label affixed to the crib’s headboard or footboard. Some labels identify the place of manufacture as Dothan, Ala. Others identify China as the country of manufacture. The name “ChildESIGNS” appears on the teething rail of some of the cribs. See the attached pictures.
The recalled cribs were sold at numerous local furniture and retail stores including Buy Buy Baby, and Kmart and Walmart stores nationwide for between $60 and $160. Consumers should contact the store from which they purchased the crib for remedy information, which will vary between a refund, replacement crib or store credit, depending on the retailer. Consumers are urged to contact CPSC and report any difficulties in obtaining a remedy from their place of purchase.
Important Message from CPSC
CPSC would like to remind parents not to use any crib with missing, broken, or loose parts. Make sure to tighten hardware from time to time to keep the crib sturdy. When using a drop-side crib, parents should check to make sure the drop-side or any other moving part operates smoothly. Always check all sides and corners of the crib for disengagement. Any disengagement can create a gap and entrap a child. In addition, do not try to repair any side of the crib, especially with tape, wire or rope.
Where to report product problems
Where to report product problems
This is another example of how important it is to report product problems not just to the company but to the government. I've posted all of that helpful information in this blog I posted February 4th.